Beautiful Window Valance Ideas
Window valance ideas – Improve the look of your home by installing valances for windows. Valances are a good way to hide the hardware for awnings and blinds. There are several ways to create a window coat and if you have a hard time with the idea curtains. The following steps are for curtains pelmet wall that fits outside a window to trim. You can also adjust the ladder to a style of interior window mounted changing measurements. Curtain styles vary, but all agree on the same goal to cover hardware window. This type of Mantua will be fixed in the wall around and above the window frame, so you need to measure the size of the window that opens add three centimeters on each side. You can make a cloak larger if you wish, but three centimeters per page is enough. Valances for windows can be easily adjusted.
4 Photos Gallery of: Beautiful Window Valance Ideas
You can use heavy cardboard or thin plywood for the window valance ideas board, whichever you prefer. Cut the board to length measurement above. For the height of the edge, is a good rule to edge of the screen should be a quarter of the total height of the window. Then measure the height of the window then divide by four for measuring the height of Mantua. Drawings curtains are the fun that you have many choices of fabrics to choose from. The fabric should be long enough to wind a valance around the edge from the bottom upward and then more about an inch on each side.
Drill screw holes or on each of the four corners of the board pelmet. The fabric should cover the screws once attached to the wall to prepare holes in advance. Use staples to attach the fabric at the lower portion of the back of the card. The upper safe when the coat is in place. After the bow on the underside of the fabric, stretch it over so you can find the hole you made for the screws. Cut slits in the square fabric on the back on top so you can wrap the fabric over the screws when the card is secure. Your slots will not appear on the front of the fabric. Window valance ideas treatment should hide the hardware.
Remember that the lower part of the tissue was secured. Secure the screws so that the edge is attached about 1/8 inches from the wall. Window valance ideas must be placed so that it is centered on the window and above the upper frame of the window of about two centimeters. You may need to pull the fabric tightly remove any wrinkles. Push the tissue between the board and the wall in the space of 1/8 inch. Then from the side of the window, in the board, flake solve the tissue at the back of the table where valance not be seen.kitchen window valance ideas